!
!

FRAME DESIGN

!

Mapie top tube design

Similar to those seen on Colnagos during the Mapie reign (not possible to re-create the airbrush paint job, but then again sending back to Colnago would cost £100's) Digitally printed onto quality white vinyl. Sorry, but I cannot offer the curved design to the front of the decal. Digital printing is excellent , but it does has it's limits where airbrush paint is concerned. This is my 'take' on the design. I have looked at hundreds of frames and not one looks exactly the same design. No wonder when you consider that these were all done by hand by various painters.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Etap du Tour route marker 2016

An absolute must for all Etap riders, not only great information, but also a super keep sake. Please note, this was the original route posted by the organisers, but a last minute change due to 'risk of avalaches!' resulted in a slight detour.

ATTENTION ALL SPORTIF ORGANISERS

Why not make your event stand out from the crowd with your own personalised route marker. For more information please contact me info@wanit.co.uk

British Cycling x 2

Definitely the 'dream team' at the moment! Come on team GB, lets grab another hat full of medals. Set includes 2 digitally printed logo's sized at 143 x 50 mm. Other sizes available on request info@wanit.co.uk

British Cycling (HSBC) x 2

Definitely the 'dream team' at the moment! Come on team GB, lets grab another hat full of medals. Price is for 2 digitally printed logo's sized at 64 x 30 mm on a white background, one for each side of top tube. Other sizes available on request info@wanit.co.uk

Campagnolo Shield

Set includes 4 sized at 20 x 25.5 mm. Digitally printed to go on black or dark items such as carbon wheel rims or frames/forks. Printed in dark black with white detail. Shown here in a grey background to show detail (not included).

Campagnolo Banner logo V3

What more can be said about this classic logo? Simply the best equipment.... ever! Digitally re-mastered and printed onto quality 70 micron vinyl, fit for any classic machine. Sized at 100 x 24 mm.  Price is for 1 decal, discount for multiple buys

 

Cannondale Coda (Kit 1)

Digitally re-produced, Cannondale Coda logo kit. Set includes 2 x Coda (78 x 20 mm), 2 x Sella Italia (66 x 25 mm), 1 x SRAM (121 x 23 mm), 1 x Hutchinson (112 x 12 mm), 2 x Mavic (53 x 20 mm), 1 x Cannondale (73 x 8 mm), 1 x DT Swiss (48 x 20 mm), 1 x Compact Disc (78 x 25 mm). This is sold as a set only and I do not split these into individual parts.

Cannondale Coda Kit (V2)

Computer cut vinyl in yellow. Set includes 2 x Time (69 x 22 mm), 2 x Coda (98 x 14 mm), 2 x Sachs (98 x 24 mm), 2 x IRC Tire (103 x 24 mm), 2 x Mavic (75 x 13 mm). Sold as a set only

Cannondale head shok kit V1 (white)

Digitally re-mastered and printed onto quality white vinyl

Cannondale head shok kit V2 (blue)

Digitally re-mastered and printed onto quality white vinyl

Colnago Club frame kit

Available in various colours including mirror silver and mirror gold. Set includes 4 x large clubs (30 x 28 mm), 4 x medium clubs (17 x 16 mm), 4 x small clubs (13 x 12 mm). Seen here on carbon effect background which is not included.

Not able to show this in a picture, but the mirror gold and silver look stunning!

Colnago Racing Man V1

Similar to those seen on Colnagos during the Mapie reign (not possible to re-create the airbrush paint job, but then again sending back to Colnago would cost £100's) Digitally printed onto quality white vinyl.

 

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Colnago Racing Man V2

Another design inspired by those seen on Colnago Masters etc.It is not possible to re-create the airbrush paint job, but then again sending back to Colnago would cost £100's) Digitally printed onto quality white vinyl.

 

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Colnago C60 logo

As seen on the underside of the downtube on the C60. Shown here on a black background (not included)

 

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Colnago head badges + worlds stripes

Digitally re-mastered and reproduced in modern 70 micron vinyl. Set includes 2 head or seat tube sized at 50 x 53 mm and bonus pair or world champion stripes sized at 111 x 20 mm.

Eddy Merckx 7-Eleven top tube

Digitally re-produced and printed on quality vinyl. To finish off your Merckx 7-Eleven project. Price is for 2 decals to fit either side of top tube.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

Eddy Merckx Motorola top tube

Digitally re-produced and printed on quality vinyl. To finish off your Merckx Motorola project. Price is for 2 decals to fit either side of top tube. Seen here on a blue background which is not included.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

France national colours stripes x 4

For all lovers of France! Pair of frame decals in the colours of France. Sized at 100 x 14 mm, to fit most frames (may need to be trimmed down for steel frames) Set includes 4

Frame design kit

Kit consists of 8 shapes to enhance the look of your bike. These have been designed to fit various tubes on a frame, but can be used wherever you like.

Frame design kit (2)

Kit consists of 3 shapes to enhance the look of your bike. 1 @ 185 x 70 mm, 2 @ 90 x 35 mm.

Frame design UK

Ideal for the top tube of most alloy/carbon frames sized at 185 x 72 mm. Support your team this year!

Frame design Australia

Ideal for the top tube of most alloy/carbon frames sized at 185 x 72 mm. Support your team this year!

Frame design kit digital 2

Digitally printed onto quality 70 micron vinyl. Will enhance the look of any frame. Item includes top tube x 1, chainstays (mirrored) x 2, head badge x 1. Other colours available on request info@wanit.co.uk

Frame design kit digital 3

Digitally printed onto quality 70 micron vinyl. Will enhance the look of any frame. Item includes top tube x 1, chainstays (mirrored) x 2, head badge x 1. Other colours available on request info@wanit.co.uk

Freddy Maertens Button

This has to be one of the rarest decals...... ever!  Price is for 1 decal each approximately 40 mm.

Italian national colours stripes x 4

For all lovers of Italy! Pair of frame decals in the colours of Italy. Sized at 100 x 14 mm, to fit most frames (may need to be trimmed down for steel frames). Set includes 4.

Look (original) kit

Digitally printed onto quality 70 micron vinyl. Set includes 2 x logo @ 100 x 35 mm, 4  x logo @ 50 x 17 mm). Perfect to enhance your frame, or for use on laptop, tool box, car window, etc.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

 

See digital instructions for fitting and care.

Mavic frame kit V1

Digitally printed onto quality 70 micron vinyl. Set includes 2 x forks, 2 x chainstay, 2 x top tube.

 

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

See digital instructions for fitting and care.

Mavic frame kit V2

Digitally printed onto quality 70 micron vinyl. Set includes 2 x forks, 2 x seat stays, 2 x chainstay, 2 x top tube. Slightly different to V1, depending on year and manufacturer.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

See digital instructions for fitting and care.

Mavic frame kit SSC

Digitally printed onto quality 70 micron vinyl. Set includes 2 x forks, 2 x chain stay/seat stay. This is the rarer SSC set from the mid 80's, they are black with metallic silver lettering.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

See digital instructions for fitting and care.

Mavic SSC forks

Digitally remastered and printed onto quality vinyl. Price is for 2 fork decals, in black and metallic silver.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

 

See digital instructions for fitting and care.

Mavic SSC chainstay set

Digitally printed onto quality 70 micron vinyl. Set includes 2 x chain stay/seat stay. This is the rarer SSC set from the mid 80's, they are black with metallic silver lettering.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

See digital instructions for fitting and care.

maxi sport for Castorama team/FIGNON

Including 'FIGNON' own name top tube decals (other rider names may be possible) maxi sport logo is 99 x 9 mm

maxi sport for Castorama team/J Durand

Including another great rider from this era, 'Jacky Durand'. This set consists of one with Maxi Sports, the other with Jacky Durand for each side of the top tube (as picture). maxi sport logo for rear of seat tube is 99 x 9 mm

ONCE top tube and seat post

Seen on Giant TCR bikes in the 90's. Set includes 2 x top tube plus 2 x seat post. Top tube measures 90 x 22 mm, seat post 73 x 30 mm (as shown horizontal) Colour is yellow. Seat tube decals are normally fitted to fluted seat post. These can be ordered separately under 'Frame parts/seat posts'

Racing Man (Skelotoid)

I've long been an admirer of Colnago frames, mainly their outstanding paint jobs! Here is my single colour version of the 'racing man' printed onto a clear background. Only colours as listed.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

See digital instructions for fitting and care.

Shimano 600 tricolour top tube x 2

Sized at 120 x 16 mm, price is for 2 decals. Can be used on any area of the frame, or not a frame at all!

Team ADR- Bottecchia

As seen on certain Bottecchia frames when Greg rode for ADR. Each decal measures 172 x 20 mm, price is for 2

Telekom Deutsche Team

Seen on certain Telekom frames, price is for 2 sets (of picture).

UCI WORLDS KIT

Digitally printed onto quality 70 micron vinyl. Enough here to make any frame look extra special. Have a look at the extra pictures to see how these can be used.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

See digital instructions for fitting and care.

World Champion frame kit

Adorn your frame with this natty World Champion stripe kit. Each decal is 100 mm in length so will fit most frames (needs trimming to 90 mm for most 28.6 steel frames). Kit is as pictured.

All printed decals should be lacquered over for a professional and permanent finish. Failure to apply the lacquer can result in premature wear to the print. Comprehensive instructions are available here on my web site, details of which will accompany the decals.

See digital instructions for fitting and care.